一本大道一卡二大卡三卡免费 _欧美一级黄色片免费看_你是我的城池营垒免费观看完整版_免费人成网站在线观看欧美

We usually do CNC, no matter which programming software you use, no matter which version you use, in the final analysis, we are setting the following parameters.

1: The cutting depth is the cutting depth of each layer;

For example, if you use a knife to cut radishes, how thick each radish is!

This is better to understand. Someone is very urgent to ask the teacher, how much should I process each floor?

Ask yourself this. Because the tool diameter as long as you know. Your tool is 80mm, 30mm, 1mm, even 0.3mm.

What's the concept of 0.3mm? It's three pieces of 1-like paper stacked together, which is the thickness of a business card. I used to grind a lot of 0.3 cutters on the grinder.

And you're going to process that material. You are processing cake or wood, or aluminum or copper.

If you cut the cake, the plastic knife will do it!

It's like you cut wood with an axe. You go down 1cm with one axe. That's 10 mm

Why don't you cut iron with an axe? As soon as you get down, your knife will fall!

If you change a suitable axe, you can use it to cut iron.

2: The rotation speed of the spindle is the rotation speed of the motor (also known as the motor) in the machine tool, which is also the rotation speed of the tool n.

Because it's a little difficult to understand, I'll help us understand.

The rotation speed of the tool can be converted into linear speed. Because the tool is installed on the chuck and rotates continuously, it is difficult to know how fast it is. If it's a car and a bike, and a motorcycle, it's a good idea. Because you have a better visual experience, you can even convert how many kilometers per hour, how many kilometers per minute, how many meters per second.

Formula for calculating linear velocity: we usually see it in books like this.

But it's written like this.

ｖ＝π＊Ｄ＊ｎ／３６０

V: that's velocity. It's actually called linear velocity. It can be understood as linear velocity.

π: It's the PI, which is usually 3.14.

D: It's the diameter of the tool. In fact, the speed we calculated in this way is the speed on the edge of the maximum diameter of the tool.

n: It's the speed of the motor.

Here, many people have a mistake, including experts!